Leave Your Message
1200V DC 2P Type 2 Surge Protection Device for PV Systems - China Suppliers & Factory
Hot Products

1200V DC 2P Type 2 Surge Protection Device for PV Systems - China Suppliers & Factory

The **Type 2 SPD Surge Protective Device 20–40kA 1200V DC 2-Pole (LKX-PV)** is an essential solution for **high-voltage photovoltaic** and **DC power networks**, offering reliable Class II surge protection. Designed to effectively mitigate transient overvoltage, switching surges, and induced lightning currents, this device incorporates **high-capacity MOV protection**, a thermal disconnector for safety, and boasts a rapid response time. It ensures long-term stability and protection for **large PV arrays**, combiner boxes, string or central inverters, battery-storage systems, DC distribution panels, and **1200V DC off-grid** or hybrid solar installations. As a leading **supplier** and **factory** in **China**, we are committed to providing top-notch surge protection solutions tailored to meet the demands of modern renewable energy systems

    01

    Model Meaning

    p1j36
    02

    Product Principle and Working Conditions

    • Meets ClassⅡ (8/20μs) SPD tests
    • Based on zinc oxide technology
    • Using 34S MOV, the maximum will be up to 8/20μs 40kA
    • No power frequency continuous flow
    • The operating environment temperature is -40°C~+80°C
    • Remote signaling function is optional
    • When product falls, the green window turns to red and remote signaling provides remote alarm function
    03

    Technical Parameter Details

    POLE 2P/2+0
    Technology MOV(Metal Oxide Varistors) GDT
    Protection mode(s) L-PE/N-PE NPE
    Nominal voltage (A.C.) [Un] 220v 300V 380V 400V 225V
    Max.continuous operating voltage (D.C.) [Ucpv] 275V 320V 385V 420V 225V
    Nominal discharge current(8/20μs) [In] 20kA 20kA
    Max.discharge current (8/20μs) [lmax] 40kA 40kA
    Protection level [Up] ≤1.5kV ≤1.6kV ≤1.8kV ≤2.0kV ≤1.5kV
    Response time [tA] ≤25ns  
    Temporary overvoltage(TOV) withstand - 5 sec [Ut] 335V 440V 440V 620V 335V
    Admissible short-circuit current [lsccr] 25kA
    Max, backup fuse 63AgL/Gg
    04

    Mechanical Data

    Mechanical Data Parameters
    Current AC system
    SPD configuration Single/Three phase
    Pluggable Available
    Mounting 35mm DlN rail
    Housing material Thermoplastic,UL 94 V-O
    Operating temperature -40℃...+80℃
    Protection rating IP20
    Remote Signaling Green/Red
    Wiring for remote signaling Optional
    Max.Voltage/Current for remote signaling Max 1.5mm solid/flexible
    Standards compliance 250V/0.1A;125V/0.2A;75V/0.5A
    Certification CE,CB,RoHS,TUV
    05

    Outer Appearance and Installation Dimensions

    409p
    58jl
    They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
    06

    Installation Considerations

    • Before installation, ensure power is disconnected. Operating while energized is strictly prohibited.
    • It is recommended to install a fuse or circuit breaker in series at the front end of the surge protection module.
    • Follow the installation diagram for connection during installation. DC+ is the positive pole, DC- is the negative pole, and PE is the ground wire. Avoid incorrect connections. After installation, close the circuit breaker (or fuse) switch and check if the operation status is normal.
    • After installation, insert the module into place and verify if the surge protection module is functioning correctly.
    • During use, regularly inspect the surge protection module and check the status of the fault display window. If the fault display window turns red or if the remote signaling terminal outputs an alarm signal, it indicates a malfunction of the surge protection module, which should be promptly repaired or replaced.
    • Parallel-connected power surge protection modules should be installed in parallel. The connection wires must be secure, reliable, short, thick, and straight.

    Frequently Asked Questions (FAQ)

    What is the operating environment temperature for this SPD?

    The operating environment temperature for this surge protective device ranges from -40°C to +80°C, making it suitable for extreme climate conditions.

    How does the status indicator window work?

    During normal operation, the window displays green. If a fault occurs or the module degrades, the window turns red, indicating that the surge protection module needs to be replaced. Optional remote signaling can also trigger an external alarm.

    What certifications does this surge protection device have?

    This product is fully certified and complies with CE, CB, RoHS, and TUV standards, ensuring high safety and reliability.

    What type of mounting is required for installation?

    The device is designed for easy installation using a standard 35mm DIN rail system and features a pluggable module design for quick maintenance.

    What are the wiring requirements for installation?

    Connection wires must be secure, reliable, short, thick, and straight. When installing, connect DC+ to the positive pole, DC- to the negative pole, and PE to the ground wire. Avoid incorrect connections and ensure power is disconnected during installation.