800V 3P T2 Surge Protection Device | China Suppliers & Factory for Medium-High Voltage DC and PV Systems
01Model Meaning
02Product principle and working conditions
- Meets ClassⅡ (8/20μs) SPD tests
- Based on zinc oxide technology
- Using 34S MOV, the maximum will be up to 8/20 μs 40kA
- No power frequency continuous flow
- The operating environment temperature is -40°C~+80°C
- Remote signaling function is optional.
- When product falls, the green window turns to red and remote signaling provides remote alarm function
03Technical parameter details
| Technical Data | ||||
| POLE | 3P | |||
| SPD Type | Type 2/ClassⅡ | |||
| Technology | MOV/MOV+GDT | |||
| Protection mode(s) | DC+PE.DC | |||
| Max.continuous operating voltage (D.c.) [Ucpv] | 800V | 1000V | 1200V | 1500V |
| Nominal discharge current(8/20μs) [In] | 20kA | |||
| Max.discharge current (8/20μs) [lmax] | 40kA | |||
| Protection level [Up] | ≤3.6kV | ≤4.0kV | ≤4.5kV | ≤5.2kV |
| Response time [tA] | ≤25ns | |||
| Admissible short-circuit current [lsccr] | 25kA | |||
| Max, backup fuse | 125AgL/Gg | |||
04Mechanical Data
| Mechanical Data | ||||
| Current | AC system | |||
| SPD configuration | Single/Three phase | |||
| Pluggable | Available | |||
| Mounting | 35mm DlN rail | |||
| Housing material | Thermoplastic,UL 94 V-O | |||
| Operating temperature | -40℃...+80℃ | |||
| Protection rating | IP20 | |||
| Remote Signaling | Green/Red | |||
| Wiring for remote signaling | Optional | |||
| Max.Voltage/Current for remote signaling | Max 1.5mm solid/flexible | |||
| Standards compliance | 250V/0.1A;125V/0.2A;75V/0.5A | |||
| Certification | CE,CB,RoHS,TUV | |||
05Outer appearance and installation dimensions
06Installation considerations
- 1. Prior to installation, confirm complete power isolation. Any operation under live conditions is expressly forbidden.
- 2. The surge protector's input side should incorporate an in-line fuse or circuit breaker as protective measure.
- 3. Adhere strictly to the provided wiring schematic: DC+ denotes positive terminal, DC- indicates negative terminal, and PE represents grounding conductor. Ensure proper polarity during installation. Upon completion, activate the protective device (circuit breaker/fuse) and validate normal operational parameters.
- 4. Following installation, properly position the unit and conduct functional verification of the surge protective device.
- 5. Implement periodic maintenance checks on the surge protector, including monitoring of the diagnostic indicator. A red warning display or alarm contact activation signifies device failure requiring immediate attention through repair or replacement.
- 6. When installing multiple surge protectors in parallel configuration, maintain true parallel wiring with properly secured connections using appropriately sized conductors of minimal length and direct routing.
Frequently Asked Questions (FAQ)
Q1: What is the maximum discharge current (Imax) of this surge protective device?
A1: The maximum discharge current (8/20μs) [Imax] for this device is 40kA, utilizing high-performance 34S MOV technology.
Q2: How does the local status indicator work for this SPD?
A2: The device features a visual diagnostic window. A green window indicates normal operation, while a red window signifies device failure, indicating that the unit needs immediate replacement.
Q3: What is the operating temperature range for this product?
A3: This surge protector is designed to operate reliably in harsh environments, with an operating temperature range of -40°C to +80°C.
Q4: Is remote monitoring supported on this model?
A4: Yes, the remote signaling function is optional. When configured, it provides remote dry contact alarm outputs when the device reaches its end of life (indicator turns red).
Q5: What mounting standard does this device support?
A5: This surge protective device is designed for easy installation on standard 35mm DIN rails, complying with IP20 protection ratings.
