Leave Your Message
China Suppliers Factory Type 1+2 SPD Surge Protective Device 275V AC 3-Pole for Industrial and Commercial Use
Hot Products

China Suppliers Factory Type 1+2 SPD Surge Protective Device 275V AC 3-Pole for Industrial and Commercial Use

The **Type 1+2 SPD Surge Protective Device 25kA 275V AC 3-Pole (LKX-T1T2-AC)** offers superior **Class I + Class II lightning and surge protection** for low-voltage power systems in China. Designed to effectively manage direct lightning currents, transient overvoltage, and switching surges, this device is essential for ensuring system integrity. Featuring advanced **GDT + high-performance MOV hybrid technology**, it guarantees fast response times, high discharge capacity, and enhanced safety through thermal disconnectors. This surge protective device is ideal for **main switchboards, distribution panels, commercial buildings, industrial equipment, and 275V AC power networks**. As a leading supplier from a trusted factory, we prioritize stability and long-term operation, making our Type 1+2 SPD the optimal choice for businesses across various sectors.

    Summary

    LKX-B+C 275V 10kA is designed for installation at LPZ 0A-1 or higher, protecting low-voltage equipment from surge damage. It is applied in modular SPD Class I+II (Class B+C) power supply systems as a single-pole protection module, engineered according to IEC 61643-11, EN 61643-11, and GB18802.11 standards.

    Highlight Features

    • 10/350, 8/20μs varistor; Lightning impulse current to Iimp 10kA.
    • Three-poles high discharge capacity surge arrester.
    • Consists of high-performance varistors and thermal disconnection devices.
    • Double terminals for flexible parallel or series (V-shape) connection.
    • Multifunctional connection interface for conductors and busbars.
    • Fault indication window (turns red when defective) and remote alarm control support.

    Technical Data

    Type LKX-B+C 275V 10kA
    Rated voltage (max. continuous voltage) [Uc] 275V AC
    Lightning impulse current (10/350) [Iimp] 10kA
    Nominal discharge current (8/20) [In] 20kA
    Max. discharge current (8/20) [Imax] 40kA
    Voltage protection level at In [Up] ≤ 1.5kV
    Response time [tA] ≤ 25ns
    TOV voltage 335V / 5sec
    Max. back up fuse [L] 200A gL/gG
    Max. back up fuse [L-L’] 125A gL/gG
    Operating temperature range [Tu] -40°C...+80°C
    Cross-sectional area 35mm² solid / 50mm² flexible
    Mounting on 35mm DIN rail
    Enclosure material Light grey thermoplastic, UL94-V0
    Dimension 2 mods (36mm)
    Test standards IEC 61643-11; EN 61643-11; GB18802.11
    Certification CE (LVD, EMC); ISO
    Type of remote signalling contact Switching contact
    Switching capacity AC: 250V/0.5A; DC: 250V/0.1A; 150V/0.2A; 750V/0.5A
    Cross-sectional area for remote signalling contact Max. 1.5mm² solid / flexible
    Packing unit 1 pc(s)

    Installation Diagram

    275V T1+T2 3P AC Surge Protective Device for 3-Phase Power Systems

    This surge protection device is engineered for 3-phase AC power distribution systems and integrates both Type 1 and Type 2 protection in a single unit. It safely discharges direct lightning strikes (10/350 μs waveform) and shields electrical systems from induced or switching surges (8/20 μs waveform). With a continuous operating voltage of 275V AC, it's an ideal choice for main distribution panels in commercial facilities, factories, and other high-risk environments.

    Perfect for:

    • Three-phase surge protection
    • Main switchboard lightning protection
    • 275V AC power supply systems
    • T1+T2 combined SPD for industrial applications
    • High-energy surge protection for commercial buildings
    • DIN rail mounted SPD for distribution boards
    • AC surge suppressor for lightning-prone areas

    Frequently Asked Questions (FAQ)

    Q: What is the benefit of a combined Type 1 + Type 2 (Class B+C) SPD?

    A combined T1+T2 SPD integrates primary protection against high-energy direct lightning strikes (10/350 μs) and secondary protection against transient switching surges (8/20 μs) into a single compact device, eliminating the need for coordinated, separate units.

    Q: Where should this surge protective device be installed?

    It is designed for standard 35mm DIN rail mounting inside main switchboards or distribution panels, positioned at the transition zone between LPZ 0A and LPZ 1 (or higher).

    Q: How do I identify when the SPD module has failed?

    The device features a clear visual status indicator that turns red when the internal thermal disconnect device triggers due to end-of-life or failure. It also features remote signaling contacts for automated building management alarms.

    Q: What does the remote signaling contact provide?

    The integrated remote signaling contact allows maintenance teams to receive external electrical alerts via a central monitoring system as soon as the module experiences an internal thermal disconnect.

    Q: What international standards does the LKX-B+C 275V comply with?

    This unit is tested and compliant with major international standards including IEC 61643-11, EN 61643-11, and GB18802.11, and is certified for CE (LVD, EMC) and ISO manufacturing quality.