China Surge Protection Device 800V DC 2P Type 2 Suppliers - LKX-PV Factory for PV and DC Power Systems
Model Meaning
Product principle and working conditions
- Meets ClassⅡ (8/20μs) SPD tests
- Based on zinc oxide technology
- Using 34S MOV, the maximum will be up to 8/20μs 40kA
- No power frequency continuous flow
- The operating environment temperature is -40°C~+80°C
- Remote signaling function is optional.
- When product falls, the green window turns to red and remote signaling provides remote alarm function
Technical parameter details
| POLE | 2P/2+0 | ||||
| Technology | MOV(Metal Oxide Varistors) | GDT | |||
| Protection mode(s) | L-PE/N-PE | NPE | |||
| Nominal voltage (A.C.) [Un] | 220v | 300V | 380V | 400V | 225V |
| Max.continuous operating voltage (D.C.) [Ucpv] | 275V | 320V | 385V | 420V | 225V |
| Nominal discharge current(8/20μs) [In] | 20kA | 20kA | |||
| Max.discharge current (8/20μs) [lmax] | 40kA | 40kA | |||
| Protection level [Up] | ≤1.5kV | ≤1.6kV | ≤1.8kV | ≤2.0kV | ≤1.5kV |
| Response time [tA] | ≤25ns | - | |||
| Temporary overvoltage(TOV) withstand - 5 sec [Ut] | 335V | 440V | 440V | 620V | 335V |
| Admissible short-circuit current [lsccr] | 25kA | ||||
| Max, backup fuse | 63AgL/Gg | ||||
Mechanical Data
| Current | AC system | |||
| SPD configuration | Single/Three phase | |||
| Pluggable | Available | |||
| Mounting | 35mm DlN rail | |||
| Housing material | Thermoplastic, UL 94 V-O | |||
| Operating temperature | -40℃...+80℃ | |||
| Protection rating | IP20 | |||
| Remote Signaling | Green/Red | |||
| Wiring for remote signaling | Optional | |||
| Max.Voltage/Current for remote signaling | Max 1.5mm solid/flexible | |||
| Standards compliance | 250V/0.1A; 125V/0.2A; 75V/0.5A | |||
| Certification | CE, CB, RoHS, TUV | |||
Outer appearance and installation dimensions
Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional information.
Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation and merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
Installation considerations
- Prior to installation, make sure the power supply is turned off. Working on live equipment is strictly forbidden.
- A fuse or circuit breaker should be connected in series upstream of the surge protector for added safety.
- Refer to the wiring diagram for proper installation. Connect DC+ to the positive terminal, DC- to the negative terminal, and PE to the grounding wire. Ensure correct polarity to prevent wiring errors. Once installed, turn on the circuit breaker (or fuse) and verify normal operation.
- Once installed, securely mount the module and confirm that the surge protector is operating as intended.
- Periodically check the surge protector and monitor the fault indicator. A red fault indicator or an alarm signal from the remote terminal means the surge protector has failed and must be repaired or replaced immediately.
- For parallel-connected surge protectors, ensure proper parallel wiring. Use short, thick, straight, and securely fastened cables for optimal performance.
Frequently Asked Questions (FAQ)
What are the main certifications and standards compliance for this SPD?
This product complies with CE, CB, RoHS, and TUV international certifications, ensuring it meets strict safety and environmental standards.
What is the operating temperature range for the device?
The surge protective device is designed to operate reliably in harsh conditions within a temperature range of -40°C to +80°C.
How does the indicator window and remote signaling function work?
The device features an indicator window: green indicates normal operation, and red indicates failure. If the remote signaling function is configured, it will provide a remote alarm signal when the product falls or fails.
What safety measures should be followed during installation?
Always turn off the power supply before starting the installation. A fuse or circuit breaker must be connected in series upstream of the SPD, and you must ensure correct polarity when wiring (DC+ to positive, DC- to negative, and PE to ground).
What are the key technical parameters for the protection level and response time?
The voltage protection level (Up) ranges from ≤1.5kV to ≤2.0kV depending on the configuration, and the response time (tA) is extremely fast at ≤25ns.
