Leave Your Message
China Surge Protection Device Suppliers | LKX-T1T2 275V 4P Type 1+2 SPD for Home Electrical Panel Factory
Hot Products

China Surge Protection Device Suppliers | LKX-T1T2 275V 4P Type 1+2 SPD for Home Electrical Panel Factory

The **Type 1+2 SPD Surge Protective Device 20–40kA 275V AC 4-Pole (LKX-T1T2)** is a premier solution for **high-energy lightning surge protection** and **transient overvoltage suppression** in **low-voltage power distribution systems**. This device, manufactured in China by leading **suppliers** and available directly from the **factory**, ensures dependable protection for residential, commercial, and industrial electrical networks. Utilizing advanced **MOV + GDT hybrid technology**, it delivers a rapid response time and high discharge capacity, ensuring stable protection for **main switchboards, distribution panels, PV systems, and critical equipment**. Choose our product to enhance the safety and reliability of your electrical systems

    01Product Principle and Working Conditions

    • Meets both Class Ⅰ(10/350 μs) and Class Ⅱ(8/20 μs) SPD tests
    • Based on zinc oxide technology
    • Using 34S-H high-performance MOV, the maximum will be up to 10/350 μs 8kA
    • No power frequency continuous flow
    • The operating environment temperature is -40℃~+80℃
    • Remote signaling function is optional
    • When product fails, the green window turns to red and remote signaling provides remote alarm function

    02Technical Parameter Details

    Technical Data
    SPD Type Type 1+2/Class Ⅰ+Ⅱ
    Technology MOV(Metal Oxide Varistors) GDT
    Protection mode(s) L-PE/N-PE NPE
    Nominal voltage (A.C.) [Un] 220v 300V 380V 400V 225V
    Max.continuous operating voltage (D.C.) [Ucpv] 275V 320V 385V 420V 225V
    Nominal discharge current(8/20μs) [In] 20kA 20kA
    Max.discharge current (8/20μs) [lmax] 40kA 40kA
    Protection level [Up] ≤1.5kV ≤1.6kV ≤1.8kV ≤2.0kV ≤1.5kV
    Response time [tA] ≤25ns  
    Temporary overvoltage(TOV) withstand - 5 sec [Ut] 335V 440V 440V 620V 335V
    Admissible short-circuit current [lsccr] 25kA
    Max. backup fuse 125AgL/Gg

    03Mechanical Data

    Mechanical Data
    Current AC system
    SPD configuration Single/Three phase
    Pluggable Available
    Mounting 35mm DIN rail
    Housing material Thermoplastic, UL 94 V-O
    Operating temperature -40℃...+80℃
    Protection rating IP20
    Remote Signaling Green/Red
    Wiring for remote signaling Optional
    Max.Voltage/Current for remote signaling Max 1.5mm solid/flexible
    Standards compliance 250V/0.1A; 125V/0.2A; 75V/0.5A
    Certification CE, CB, RoHS, TUV

    04Outer Appearance and Installation Dimensions

    Outer appearance dimensions diagram
    Installation dimensions specifications
    25.To have much more enterprise. ompanions, we've got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our goods list and company. For further acknowledge, our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They're going to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you. 
    26.Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation. 

    05Installation Considerations

    • Make sure the electricity is turned off before installation. It is completely forbidden to operate when electrified.
    • It is advised to connect a circuit breaker or fuse in series with the surge protection module's front end.
    • During installation, adhere to the installation schematic for connection. Steer clear of bad connections. Close the circuit breaker (or fuse) switch after installation, then make sure everything is operating normally.
    • After installation, make sure the surge protection module is operating properly by putting it in place.
    • Check the condition of the fault display window and conduct routine inspections of the surge protection module while in use. The surge protection module needs to be changed or repaired right away if the fault display window turns red or if the remote signaling terminal emits an alert signal.
    • It is recommended to install parallel-connected power surge protection devices. The connection wires need to be straight, short, thick, dependable, and secure.

    Frequently Asked Questions (FAQ)

    Q: Which SPD test standards does this product comply with?
    This surge protection device (SPD) meets both Class Ⅰ (10/350 μs) and Class Ⅱ (8/20 μs) SPD test requirements, making it suitable for demanding lightning and surge protection environments.
    Q: What technology is used in this surge protection module?
    It is based on high-performance zinc oxide technology, utilizing 34S-H Metal Oxide Varistors (MOV) to prevent power frequency continuous flow and handle maximum discharge currents up to 40kA.
    Q: How do I know if the surge protection module has failed?
    The device features a clear visual indicator window. When the product fails, the green window turns to red. Additionally, an optional remote signaling terminal can provide a remote alarm signal.
    Q: What is the operating temperature range and mounting type?
    The operating environment temperature range is from -40℃ to +80℃, and the device is designed for easy installation on standard 35mm DIN rails.
    Q: What are the key safety precautions during installation?
    Always turn off the electricity before installation. It is highly recommended to connect a circuit breaker or fuse in series with the SPD's front end, keep the connection wires straight and short, and conduct regular visual checks of the status window.