Type 2 DC Surge Protection
010203
Din Rail Surge Protection Device 800V 2P Type 2| LKX-PV
01
Model Meaning
02
Product principle and working conditions
1.Meets ClassⅡ (8/20μs) SPD tests
2. Based on zinc oxide technology
3. Using 34S MOV, the maximum will be up to 8/20μs 40kA
4. No power frequency continuous flow
5.The operating environment temperature is -40°C~+80°C
6. Remote signaling function is optional.
7. When product falls, the green window turns to red and remote signaling provides remote alarm function
03
Technical parameter details
| POLE | 2P/2+0 | ||||
| Technology | MOV(Metal Oxide Varistors) | GDT | |||
| Protection mode(s) | L-PE/N-PE | NPE | |||
| Nominal voltage (A.C.) [Un] | 220v | 300V | 380V | 400V | 225V |
| Max.continuous operating voltage (D.C.) [Ucpv] | 275V | 320V | 385V | 420V | 225V |
| Nominal discharge current(8/20μs) [In] | 20kA | 20kA | |||
| Max.discharge current (8/20μs) [lmax] | 40kA | 40kA | |||
| Protection level [Up] | ≤1.5kV | ≤1.6kV | ≤1.8kV | ≤2.0kV | ≤1.5kV |
| Response time [tA] | ≤25ns | ||||
| Temporary overvoltage(TOV) withstand - 5 sec [Ut] | 335V | 440V | 440V | 620V | 335V |
| Admissible short-circuit current [lsccr] | 25kA | ||||
| Max, backup fuse | 63AgL/Gg | ||||
04
Mechanical Data
| Mechanical Data | ||||
| Current | AC system | |||
| SPD configuration | Single/Three phase | |||
| Pluggable | Available | |||
| Mounting | 35mm DlN rail | |||
| Housing material | Thermoplastic,UL 94 V-O | |||
| Operating temperature | -40℃...+80℃ | |||
| Protection rating | IP20 | |||
| Remote Signaling | Green/Red | |||
| Wiring for remote signaling | Optional | |||
| Max.Voltage/Current for remote signaling | Max 1.5mm solid/flexible | |||
| Standards compliance | 250V/0.1A;125V/0.2A;75V/0.5A | |||
| Certification | CE,CB,RoHS,TUV | |||
05
Outer appearance and installation dimensions
5.Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional nformation.
Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
06
Installation considerations
1. Prior to installation, make sure the power supply is turned off. Working on live equipment is strictly forbidden.
2. A fuse or circuit breaker should be connected in series upstream of the surge protector for added safety.
3. Refer to the wiring diagram for proper installation. Connect DC+ to the positive terminal, DC- to the negative terminal, and PE to the grounding wire. Ensure correct polarity to prevent wiring errors. Once installed, turn on the circuit breaker (or fuse) and verify normal operation.
4. Once installed, securely mount the module and confirm that the surge protector is operating as intended.
5. Periodically check the surge protector and monitor the fault indicator. A red fault indicator or an alarm signal from the remote terminal means the surge protector has failed and must be repaired or replaced immediately.
6. For parallel-connected surge protectors, ensure proper parallel wiring. Use short, thick, straight, and securely fastened cables for optimal performance.