Leave Your Message
Single Phase Surge Protective Device LKX-C40 385V 20-40kA from China Suppliers and Factory - Type 2 SPD
Hot Products

Single Phase Surge Protective Device LKX-C40 385V 20-40kA from China Suppliers and Factory - Type 2 SPD

The **Type 2 SPD Surge Protective Device 20–40kA 385V AC (LKX-C40)** is an essential solution for **surge protection** in **China**. Designed specifically for **Class II transient overvoltage protection**, this device effectively safeguards your 385V AC power systems from harmful switching surges, indirect lightning strikes, and electrical noise disturbances. Its advanced features include **high-energy MOV components**, a rapid response time, thermal disconnection protection, and clear status indication windows, making it an ideal choice for safe and reliable operation. Suitable for **residential and commercial distribution boards**, industrial control cabinets, HVAC systems, EV chargers, and general 385V AC circuits, this product is manufactured by reputable **suppliers** in the industry and is backed by a trusted **factory** commitment to quality. Protect your equipment with our state-of-the-art surge protective device today!

    01

    Product principle and working conditions

    Meets Class Ⅱ (8/20 μs) SPD tests

    Based on zinc oxide technology

    Using 34S MOV, the maximum will be up to 8/20μs 40ka

    No power frequency continuous flow

    Compact, yet high surge rated pluggable design, using minimum 35mm DIN rail width

    The operating environment temperature is -40℃~+80℃

    Red/Green status indication and change-over contacts standard for remote monitoring (Remote function is Option)

    02

    Technical parameter details

    Technical Data
    POLE 2P / 2+0
    Technology MOV (Metal Oxide Varistors) GDT
    Protection mode(s) L-PE / N-PE NPE
    Nominal voltage (A.C.) [Un] 220V 300V 380V 400V 225V
    Max. continuous operating voltage (D.C.) [Ucpv] 275V 320V 385V 420V 225V
    Nominal discharge current (8/20μs) [In] 20kA 20kA
    Max. discharge current (8/20μs) [Imax] 40kA 40kA
    Protection level [Up] ≤1.5kV ≤1.6kV ≤1.8kV ≤2.0kV ≤1.5kV
    Response time [tA] ≤25ns -
    Temporary overvoltage (TOV) withstand - 5 sec [Ut] 335V 440V 440V 620V 335V
    Admissible short-circuit current [Isccr] 25kA
    Max. backup fuse 63A gL/gG
    03

    Mechanical Data

    Mechanical Data
    Current AC system
    SPD configuration Single / Three phase
    Pluggable Available
    Mounting 35mm DIN rail
    Housing material Thermoplastic, UL 94 V-0
    Operating temperature -40℃...+80℃
    Protection rating IP20
    Remote Signaling Green/Red
    Wiring for remote signaling Optional (Max 1.5mm² solid/flexible)
    Max. Voltage/Current for remote signaling 250V/0.1A; 125V/0.2A; 75V/0.5A
    Standards compliance Standards compliant
    Certification CE, CB, RoHS, TUV
    04

    Outer appearance and installation dimensions

    05

    Installation considerations

    1

    Before installation, ensure power is disconnected. Operating while energized is strictly prohibited.

    2

    It is recommended to install a fuse or circuit breaker in series at the front end of the surge protection module.

    3

    Follow the installation diagram for connection during installation. Avoid incorrect connections. After installation, close the circuit breaker (or fuse) switch and check if the operation status is normal.

    4

    After installation, insert the module into place and verify if the surge protection module is functioning correctly.

    5

    During use, regularly inspect the surge protection module and check the status of the fault display window. If the fault display window turns red or if the remote signaling terminal outputs an alarm signal, it indicates a malfunction of the surge protection module, which should be promptly repaired or replaced.

    6

    Parallel-connected power surge protection modules should be installed in parallel. The connection wires must be secure, reliable, short, thick, and straight.

    06

    Frequently Asked Questions (FAQ)

    What surge test class does this device comply with?

    This SPD meets Class Ⅱ (8/20 μs) test standards, utilizing high-performance 34S MOV technology to deliver maximum discharge currents up to 40kA.

    How do I know if the surge protector is functioning or faulty?

    The unit features a visual status window (Green for normal, Red for malfunction). If the window turns red or the optional remote signal sends an alarm, the module needs prompt replacement.

    What is the operating temperature range for this SPD?

    The device is designed to work reliably in extreme operating environment temperatures ranging from -40℃ to +80℃.

    What type of mounting does the device require?

    It is designed for standard 35mm DIN rail mounting with a compact, pluggable format for easy maintenance and replacement.

    What certifications does this product hold?

    The product is certified under CE, CB, RoHS, and TUV standards, ensuring compliance with international electrical safety requirements.

    What are the key wiring requirements during installation?

    Wiring should be installed in parallel and must remain secure, reliable, short, thick, and straight. A backup fuse or circuit breaker is recommended at the front end.