Type 2 SPD Surge Protection Device 1000V DC 2P for PV Systems | China Suppliers & Factory - LKX-PV
Model Meaning
Product principle and working conditions
- Meets ClassⅡ (8/20μs) SPD tests
- Based on zinc oxide technology
- Using 34S MOV, the maximum will be up to 8/20μs 40kA
- No power frequency continuous flow
- The operating environment temperature is -40°C~+80°C
- Remote signaling function is optional
- When product falls, the green window turns to red and remote signaling provides remote alarm function
Technical parameter details
| POLE | 2P/2+0 | ||||
| Technology | MOV(Metal Oxide Varistors) | GDT | |||
| Protection mode(s) | L-PE/N-PE | NPE | |||
| Nominal voltage (A.C.) [Un] | 220v | 300V | 380V | 400V | 225V |
| Max.continuous operating voltage (D.C.) [Ucpv] | 275V | 320V | 385V | 420V | 225V |
| Nominal discharge current(8/20μs) [In] | 20kA | 20kA | |||
| Max.discharge current (8/20μs) [lmax] | 40kA | 40kA | |||
| Protection level [Up] | ≤1.5kV | ≤1.6kV | ≤1.8kV | ≤2.0kV | ≤1.5kV |
| Response time [tA] | ≤25ns | ||||
| Temporary overvoltage(TOV) withstand - 5 sec [Ut] | 335V | 440V | 440V | 620V | 335V |
| Admissible short-circuit current [lsccr] | 25kA | ||||
| Max, backup fuse | 63AgL/Gg | ||||
Mechanical Data
| Mechanical Data | ||||
| Current | AC system | |||
| SPD configuration | Single/Three phase | |||
| Pluggable | Available | |||
| Mounting | 35mm DIN rail | |||
| Housing material | Thermoplastic, UL 94 V-0 | |||
| Operating temperature | -40℃...+80℃ | |||
| Protection rating | IP20 | |||
| Remote Signaling | Green/Red | |||
| Wiring for remote signaling | Optional | |||
| Max.Voltage/Current for remote signaling | Max 1.5mm solid/flexible | |||
| Standards compliance | 250V/0.1A; 125V/0.2A; 75V/0.5A | |||
| Certification | CE, CB, RoHS, TUV | |||
Outer appearance and installation dimensions
Installation considerations
- 1 Prior to mounting, verify that electrical supply is isolated. Working on live equipment is absolutely forbidden.
- 2 A protective fuse or breaker should be serially connected upstream of the lightning arrester unit.
- 3 Refer to wiring schematics for proper installation. Positive DC connects to DC+, negative to DC-, with PE as earth ground. Prevent reverse polarity. Upon completion, activate the protection device (fuse/breaker) and confirm normal operational indicators.
- 4 Post-installation, properly seat the component and validate correct functioning of the overvoltage protector.
- 5 Routine maintenance should include visual inspection of the SPD and monitoring of its diagnostic indicator. Either a red warning display or alarm contact activation denotes device failure requiring immediate replacement.
- 6 Multi-unit surge suppressors in parallel configuration must maintain true parallel wiring, using minimal-length, large-gauge conductors with secure terminations and straight-line routing.
Frequently Asked Questions (FAQ)
What core technology is used in this Surge Protective Device (SPD)?
This SPD is based on zinc oxide technology and utilizes a 34S MOV (Metal Oxide Varistor) to achieve a maximum discharge current of up to 40kA (8/20μs) without power frequency continuous flow.
How do I know if the SPD has failed and needs replacement?
The device is equipped with a diagnostic window indicator. When the product fails, the green window turns to red. Additionally, if the optional remote signaling function is configured, it will trigger a remote alarm.
What are the environmental and mounting specifications for this device?
The operating temperature range is -40°C to +80°C. The housing features an IP20 protection rating and is designed for standard 35mm DIN rail mounting.
What certifications does this surge protective device hold?
The product meets rigorous international quality standards and is certified by CE, CB, RoHS, and TUV.
What safety precautions must be followed during installation?
Always isolate the electrical power before mounting. A protective fuse or breaker must be connected upstream of the unit, and all parallel wiring configurations must use minimal-length, large-gauge conductors to maintain secure connections.
