Leave Your Message
Type 2 Surge Protective Device 20-40kA 385V AC - LKX-C40 from China Suppliers and Factory
Hot Products

Type 2 Surge Protective Device 20-40kA 385V AC - LKX-C40 from China Suppliers and Factory

The **Type 2 SPD Surge Protective Device 20–40kA 385V AC (LKX-C40)** is a high-performance solution for transient overvoltage protection, specifically designed for 385V AC power systems. This device is ideal for safeguarding equipment against switching surges, indirect lightning strikes, and electrical noise disturbances. Featuring **high-energy MOV components** and a quick response time, it is built for reliability and safety. With thermal disconnection protection and status indication windows, this surge protective device ensures optimal performance in various applications, including **residential and commercial distribution boards, industrial control cabinets, HVAC systems, EV chargers, and general 385V AC circuits**. As a leading manufacturer and supplier in China, our factory is committed to providing robust and effective surge protection solutions for all your electrical needs

    Product Principle and Working Conditions

    Meets Class Ⅱ (8/20 μs) SPD tests

    Based on zinc oxide technology

    Using 34S MOV, the maximum will be up to 8/20μs 40ka

    No power frequency continuous flow

    Compact, yet high surge rated pluggable design, using minimum 35mm DIN rail width

    The operating environment temperature is -40℃ ~ +80℃

    Red/Green status indication and change-over contacts standard for remote monitoring. (Remote function is Option)

    Technical Parameter Details

    Technical Data
    POLE 2P/2+0
    Technology MOV (Metal Oxide Varistors) GDT
    Protection mode(s) L-PE/N-PE NPE
    Nominal voltage (A.C.) [Un] 220V 300V 380V 400V 225V
    Max. continuous operating voltage (D.C.) [Ucpv] 275V 320V 385V 420V 225V
    Nominal discharge current (8/20μs) [In] 20kA 20kA
    Max. discharge current (8/20μs) [Imax] 40kA 40kA
    Protection level [Up] ≤1.5kV ≤1.6kV ≤1.8kV ≤2.0kV ≤1.5kV
    Response time [tA] ≤25ns -
    Temporary overvoltage (TOV) withstand - 5 sec [Ut] 335V 440V 440V 620V 335V
    Admissible short-circuit current [Isccr] 25kA
    Max. backup fuse 63AgL/Gg

    Mechanical Data

    Mechanical Data
    Current AC system
    SPD configuration Single/Three phase
    Pluggable Available
    Mounting 35mm DIN rail
    Housing material Thermoplastic, UL 94 V-0
    Operating temperature -40℃ ... +80℃
    Protection rating IP20
    Remote Signaling Green/Red
    Wiring for remote signaling Optional
    Max. Voltage/Current for remote signaling Max 1.5mm² solid/flexible
    Standards compliance 250V/0.1A; 125V/0.2A; 75V/0.5A
    Certification CE, CB, RoHS, TUV

    Outer Appearance and Installation Dimensions

    Installation Considerations

    1

    Before installation, ensure power is disconnected. Operating while energized is strictly prohibited.

    2

    It is recommended to install a fuse or circuit breaker in series at the front end of the surge protection module.

    3

    Follow the installation diagram for connection during installation. Avoid incorrect connections. After installation, close the circuit breaker (or fuse) switch and check if the operation status is normal.

    4

    After installation, insert the module into place and verify if the surge protection module is functioning correctly.

    5

    During use, regularly inspect the surge protection module and check the status of the fault display window. If the fault display window turns red or if the remote signaling terminal outputs an alarm signal, it indicates a malfunction of the surge protection module, which should be promptly repaired or replaced.

    6

    Parallel-connected power surge protection modules should be installed in parallel. The connection wires must be secure, reliable, short, thick, and straight.

    Frequently Asked Questions (FAQ)

    What standard tests does this surge protection device meet?

    This surge protection device (SPD) meets Class Ⅱ (8/20 μs) SPD tests, utilizing zinc oxide technology and a 34S MOV to handle a maximum discharge current up to 40kA.

    What is the operating temperature range for this SPD?

    The operating environment temperature range for the device is -40℃ to +80℃.

    Does the device support remote monitoring?

    Yes, the device features a standard Red/Green status indication and change-over contacts standard for remote monitoring. The remote function is optional.

    What are the mounting and installation requirements?

    The device features a compact, pluggable design suitable for a minimum 35mm DIN rail width. It must be installed in parallel with secure, short, thick, and straight connection wires.

    What should I do if the status display window turns red?

    If the fault display window turns red or the remote signaling terminal outputs an alarm signal, it indicates a malfunction. The surge protection module should be promptly repaired or replaced.

    Is it necessary to install a fuse before the surge protection module?

    Yes, it is highly recommended to install a fuse or circuit breaker in series at the front end of the surge protection module to ensure safety.