News
Will Surge Protector Work Without Ground?
A surge protector cannot work properly without grounding. For real protection against voltage spikes, make sure your outlet is grounded and your wiring is up to code.
Why Your Lightning Protection System Is Only Half Complete Without Internal Protection?
A professional surge protection device (SPD) operates through multi-stage energy transfer and voltage clamping mechanisms. At its core, it uses components like MOVs and GDTs to rapidly divert surge energy to ground and clamp the residual voltage within safe limits for connected equipment. Its effectiveness hinges on component quality, earth lead length, and coordinated layered protection. Key performance indicators (KPIs) such as clamping voltage (Up) and surge life cycles ensure long-term reliability.
Surge Protector Device Buying Guide: 3 Smart Tips to Pick the Real Deal
Discover how to choose a reliable surge protective device (SPD) by evaluating manufacturing processes, certifications, and lab testing — essential for electrical system safety.
Internal Lightning Protection and Surge Devices: What's the Difference?
Internal lightning protection focuses on preventing dangerous sparks caused by lightning currents, mainly through equipotential bonding and insulation. Surge protection aims to shield internal systems from lightning-induced surges using coordinated SPDs, shielding, grounding, and isolation techniques. The IEC 62305 series clearly distinguishes these two concepts, with SPM addressing surge effects and internal LPS addressing spark risks. Together, both are essential parts of a complete lightning protection strategy.
Surge Protection Devices Selection for PV Systems - SPDs Parameter
This article explains how to choose the right SPDs for the DC side of rooftop solar systems, stressing the need for PV-specific devices with proper voltage and current ratings. It also points out that standard values are just minimums, so system layout, grounding, and lightning protection should be carefully considered.
How to Correctly Select a Surge Protective Device (SPD)
SPD selection requires comprehensive evaluation of system voltage, lightning risk, equipment withstand capability, and installation environment.
Selection Surge Protection Devices Selection for PV Systems - SPDs Installation
Photovoltaic (PV) power generation is a key source of renewable energy and is becoming increasingly competitive compared to traditional power generation from an economic standpoint. Among the various types of PV applications, small-scale distributed systems—such as rooftop PV installations—are the most widely used.
Five Protection Methods of Surge Protectors
It is estimated that 75% of electronic product failures are caused by transients and surges. Voltage transients and surges are ubiquitous—whether from power grids, lightning strikes, explosions, or even the act of walking on a carpet, which can generate tens of thousands of volts of electrostatic induction. These are all invisible yet deadly threats to electronic devices.
Therefore, to improve the reliability of electronic products and ensure human safety, protective measures against voltage transients and surges must be implemented.
Selection Surge Protection Devices Selection for PV Systems – Types of SPDs
Rooftop PV systems involve both AC and DC power distribution, with voltages reaching up to 1500V. In particular, the DC side—such as PV panels—may be directly exposed to areas prone to lightning strikes, making them highly susceptible to lightning damage. Even if the PV modules do not suffer insulation failure under lightning-induced overvoltage, their electrical performance may still degrade. This places higher demands on overvoltage protection for rooftop PV systems.
Key Parameters and test standards of Surge Protective Devices (SPDs)
Surge Protective Device (SPD): A device used to limit transient overvoltages and divert surge currents.